Garage Door Repair Service Mississauga

    Looking for Garage Door Repair services in Mississauga or one of the surrounding cities?

    CALL NOW: ☎️ (647) 957-9511

    Give us a call or leave us a message.

    Garage Door Repair Service Mississauga

    Mississauga’s Leading Garage Door Repair and Installation Company



    All Service Areas

    Garage door repairs are a popular past time these days.

    The pandemic forced people to be hyperaware of their homes and the overhead doors are becoming one of the most searched keywords on Google.

    These doors are notorious for malfunctioning even when not in use.

    The complex machinery behind one door is enough to keep people from being bored.

    However, garage doors should be taken seriously.

    You may be scratching your head right now as to why your door is suddenly not working.

    It comes down to two things; inactivity and lack of maintenance.

    The pandemic forced people to stay at home and so garage doors weren’t in use for months.

    Lack of maintenance leads to severe consequences because you end up finding the problem when it’s already too late.

    Here are some tips to keep garage door problems at bay.

    Maintenance

    Basic maintenance is something you can do.

    That requires you to observe the way your door works and compare each day to see if there’s something amiss.

    Maintenance starts at observation.

    Motors, pulleys, axels, and cables should be cleaned and lubricated.

    This will stop these parts from getting caught on each other’s parts or wearing away.

    By doing these things, you are keeping your door in top shape.

    However, advanced maintenance is still a requisite.

    You will need to have a trusted garage door repair shop to do that for you.

    With that in mind, here are some common garage door problems you may encounter.

    Common Garage Door Problems

    Unaligned Photo Eye

    The photo-eye is a safety feature made up of two black boxes that detect if there is something below the garage door.

    It was invented in 1983 and is a part of every overhead door in existence today.

    The photo-eye is extremely sensitive and easily tilts or builds up dirt.

    There’s something wrong with the photo-eye if the lens does not permit a beam of light to come through.

    The remedy for that is to clean the lens.

    If that does not solve the problem, then the issue is complex and should be left to a technician to diagnose and repair.

    Improperly adjusted springs

    Extension springs and torsion springs function to keep the garage door from closing on its own.

    The springs are attached to safety cables to equalize the tension.

    If the springs are not adjusted equally, that will affect the door’s function and the safety cables.

    The door will emit loud, grinding noises and the safety cables will escape from its spool.

    Safety cables can also snap due to the applied force.

    The unequal amount of tension can break the springs and affect the shaft for torsion springs.

    Wires are also at risk of breaking when that happens.

    This is a repair we do not encourage people to make into a project.

    It consists of many steps and parts that anything can go wrong and will have serious consequences.

    Frequency Problems

    If your door won’t open unless the remote is close, the problem lies in the frequency.

    Frequency coming from external devices jams the signal or can cause the doors to open and close on its own.

    Radios, LED lights, and a neighbor’s garage door remote can cause the antenna to malfunction.

    To fix this, check the transmitters first.

    If that is not the problem, then the next thing on the list is the antenna.

    A lopsided antenna affects its effectivity in receiving a signal.

    The solution is to straighten the antenna and the wires surrounding the antenna.

    See if the antenna wires are securely connected to the logic board.

    If that still does not fix things, then remove devices close to the opener antenna.

    Use a jammer to keep unwanted signals from being received by the antenna.

    Another way to solve the issue is to install an antenna extension.

    These problems can be done as a DIY project.

    We do recommend that you use insulated gloves to keep yourself from being electrocuted.

    Overall, garage door problems have straightforward solutions.

    A background in this topic goes a long way.

    Garage door repair services are a convenient and time-saving choice.

    Need a Garage Door Installed? We Do That Too!

    Garage doors tend to malfunction even when not in use.

    That is exactly the case in this pandemic.

    After being overworked up and down, it suddenly stops operating for months.

    Using it again after such a long time of inactivity will affect the door’s efficiency.

    That is why garage door repair shops encourage homeowners to do maintenance during the lockdown.

    Overhead doors, including its summative parts, weigh three-hundred-pounds on an average and can exceed four-hundred pounds.

    That may be daunting for you to learn now.

    We encourage you to learn about garage doors for starters to help you diagnose the problem and see if you can fix it.

    If not, we are located in Mississauga and would love to assist you.

    Maintenance starts with observation.

    When you use your door, always observe the way it works.

    Check if it makes sounds or resisting.

    Evaluate the pulleys, axels, and springs of the door.

    Clean your garage door from time to time to avoid dirt build-up as that affects the materials that make up the door.

    However, that will only keep problems at bay.

    After all, garage door parts will deteriorate and be in need of replacements and updates from time to time.

    Here are some common garage door problems.

    More Common Door Problems

    Faulty Ground Fault Interpreter

    A ground fault interpreter is a safety measure to keep you safe from being electrocuted.

    Logic boards, antennas, wirings, any overhead door tech device may malfunction.

    Overheating can also be a cause that will trigger the ground fault interpreter

    While the cause is unknown, a ground fault interpreter is there to make sure that you don’t get hurt.

    A faulty ground interpreter is easily triggered.

    To fix this, you can reprogram the ground fault interpreter.

    Find the switch and turn it on and off to reprogram it.

    It will reset the settings.

    Check the reason why the ground fault interpreter was triggered.

    If the problem persists, then it is time to call for a technician to look into it.

    Malfunctioning Tracks

    You know the track door is having issues when it emits a loud, grinding noise.

    When the door refuses to open, that means that the track doors have stopped running.

    One of the reasons why it did can be attributed to the doors being anchored on the garage walls.

    It is easy to fix this by separating the door from the wall and tightening the loose bolts using a wrench.

    Another reason may be because the tracks were dented.

    Depending on the dent, you can fix it by straightening the dents with a hammer.

    However, if the damage is too big, it is best to just replace the track doors.

    Unresponsive Door Limit Settings

    There is something wrong with the door limit settings when the overhead door is not opening and closing properly.

    This can be confirmed by flashing safety sensors.

    When you are sure that the door limit settings are the problem, you will need to set the door on manual mode.

    The limit settings have to be updated manually.

    Depending on the issue, it may need adjustments or updates.

    Loose Roller Bearings

    Garage door roller bearings are mostly made of plastic.

    This will require a complete replacement.

    Garage repair shops have access to commercial-grade rollers.

    There are also tools that will be used that might not be in your toolbox.

    The replacement also needs to be measured and tested, which is a tedious job.

    Vibrating Doors

    Vibrating doors may be caused by a moving opener.

    The placing affects the opener causing it to move, which leads to the door to vibrate.

    If the opener keeps on getting hit, it might be dismantled from its place.

    Call a local technician to install anti-vibration pads to keep the door opener safe.

    Garage door repair is a constant challenge of choosing your battles.

    Some of the problems enumerated above can be fixed on your own with assistance.

    However, some are best left in the hands of experienced technicians.

    Still, you should always brush up on your garage door knowledge.

    Observe the door and its machinations on a weekly basis and fix the smallest issue that arises.

    We are located in Mississauga

    If you are in or close to Mississauga, call us and we’ll do reparations and more for you.

    If you need garage door repair services, give us a call.

    5/5 - (1 vote)
    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar