Garage Door Repair Lakeview, Mississauga
Garage doors operate in two ways; it opens up, and it closes down.
Simple, right?
Well, with that simple function, many things go wrong.
The pandemic has forced people to check on their garages.
You might be one of them too.
Overhead doors have a complex system that enables it to function.
That is why it requires maintenance and tune-ups.
You may be tempted to make it a home project to kill time.
However, we’re talking about a three-hundred to four-hundred-pound door.
That should make you pick your battles and, if not, surrender it to the experts.
Basic Overhead Door Maintenance
For you to keep problems at bay, you need to do simple door maintenance.
Here are some examples of what you can do to keep your garage door in good shape.
First, you must observe.
Yes, simply observing the doors will help you find out what is wrong with your garage door and if it can be fixed easily.
Check the settings periodically, whether it is something physical such as the logic board or it is your signal frequency.
Keep cables, pulleys, and axles clean and lubricated.
When these things are dirty, they tend to stick together or wear out easily.
However, don’t think for one second that you can avoid problems at all.
Something will go wrong, and sometimes, it is out of your control.
Here are some common Garage Door Problems that you can and should not fix.
Common Overhead Door Problems
Dead Transmitter Batteries
Dead transmitter batteries sound like an easy thing to fix, right?
Well, when it comes to electricity, it is a good idea to leave it to technicians.
You may not have the tools to do a replacement.
Garage door repair shops do.
Replacing the transmitter batteries might include replacing the transmitter door itself.
Noisy Door
When your door emits noise, the fix may be simple.
Your axels and pulleys may have build-up debris.
Clean it with a dry cloth and lubricate it.
If it is still making noises, there must be parts of it that wore off and got chipped away.
The solution is to replace these parts.
However, if you’ve done all of this, the problem may be your track door.
If that is the case, check if your track door is attached to the wall or it has loosened bolts.
The track door might also have been moved out of its case.
It can simply be remedied by pushing the track door back in place.
Broken Torsion Spring
Now, this is a problem you should not attempt to fix when you are not well-versed with springs.
A broken torsion spring is diagnosed when your door suddenly feels heavier than before when manually opened.
You will face resistance, and that in itself is a safety hazard.
A torsion spring is the type of garage door spring that is attached to a shaft helically.
People are normally discouraged from making it a DIY project because of the complicated process of replacement.
The door opener is extremely sensitive and it will have to be fixed with the door closed.
Broken torsion springs should be left at the hands of an experienced technician.
Interrupted Signal
The interrupted signal goes down to the opener range’ antenna.
It may be receiving other signals, causing it to malfunction.
That or something made it lopsided.
Either way, interrupting signals can be fixed easily.
First, remove anything in close proximity that may be interrupting the signal.
That may be a LED light or a radio.
If your neighbor’s garage is close to yours, use a jammer to keep their signal away from yours.
When that does not fix anything, it is time to fix the antenna itself.
Your antenna may be old, or something was removed from the logic board.
Screw the bolts and straighten the antenna.
The last resort is the need for an antenna extension or to replace the antenna itself.
These are only some of the few problems that can go wrong with an overhead door.
It is imperative to observe your door even when not in use.
Our garage door repair service in Lakeview would be glad to assist and do repairs for you.
So call now.
